Product Carousel Tabs
Aeotec Z-wave key fob
The Z-Wave.Me Key Fob is a Z-Wave device that can both control other Z-Wave devices and activate predefined scenes in an IP gateway. Although it is controlling other devices the Z-Wave.Me Key Fob can’t act as Z-Wave network controller (primary or secondary) and will always need a Z-Wave network controller to be included into a Z-Wave network. The Z-Wave.Me Key Fob can be used in five different modes that are picked by configuration commands:
Aeotec Heavy Duty Switch 30 Amp
Aeotec Heavy Duty Switch 30 Amp
Aeon Labs Heavy Duty Switch
The Aeon Labs Heavy Duty Switch can control, automate and record the electricity consumption of a premise’s heavy-duty appliances. Works in and outdoors with appliances up to 30 amps. Ideal to switch your Geyser on and off on a time schedule created in the Home Automation Center.
Fibaro Motion Sensor Apple HomeKit Enabled
Fibaro Motion Sensor Apple HomeKit Enabled
Extremely versatile 4-in-1 Z-Wave sensor combining motion, temperature, light level and vibration functions.
FIBARO TEMPERATURE SENSOR
Fibaro Temperature sensor
The Fibaro Temperature sensor is a digital thermometer with programmable resolution of 9 to 12 bits. It is suitable for measurement of the temperature in homes or offices. The accuracy is ±0.5 °C over a range of -10 ° C to 85 °C. The sensor is very small and can therefore be installed in another device(Eg Fibaro Door and Window Sensor). In addition, each sensor is addressed with a 64-bit code. For this reason several sensors can be connected to a single 1-Wire line. The power supply of 3 V to 5.5 V is directly powered via the data line.
FIBARO DIMMER BYPASS
Fibaro Dimmer Bypass is a device complementary to Fibaro Dimmer2.
Its installing a Fibaro Dimmer Bypass makes it possible to dim light sources with minimum power consumption, such as e.g. single 0,5Watt LED. Please note it is possible to dim only light sources clearly marked as dimmable.
AEOTEC MINIMOTE
The Aeon Labs Minimote is low-cost remote controller focused on end-user ease of use.
Although simplicity and user experience is the primary focus, the full range of Z-Wave remote controller capabilities are left intact for the advanced user. Network installation is vastly improved via the interface. The Minimote is upgradeable by the end-user such that the latest Z-Wave protocols are always available. An internal lithium battery allows for months of usage and is recharged via USB.
Aeotec Micro Switch
The Aeon Labs Micro Switch is a low-cost Z-Wave appliance switch specifically used to enable Z-Wave command and control (on/off) for existing in-wall switches. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.
LIFX Colour 1000 Wi -Fi Smart LED Light Bulb,Works with Alexa Multi-Colour, Dimmable, No Hub Required, Edison Screw E27 [Energy Class A ]
LIFX Colour 1000 Wi -Fi Smart LED Light Bulb,Works with Alexa Multi-Colour, Dimmable, No Hub Required, Edison Screw E27 [Energy Class A ]
Bestsellers
Smartphones
- Controllers
Aeotec Z-wave key fob
The Z-Wave.Me Key Fob is a Z-Wave device that can both control other Z-Wave devices and activate predefined scenes in an IP gateway. Although it is controlling other devices the Z-Wave.Me Key Fob can’t act as Z-Wave network controller (primary or secondary) and will always need a Z-Wave network controller to be included into a Z-Wave network. The Z-Wave.Me Key Fob can be used in five different modes that are picked by configuration commands:
SKU: n/a - Energy Management, Heavy duty energy mngt, SmartThings, Technologies, Z-wave
Aeotec Heavy Duty Switch 30 Amp
Energy Management, Heavy duty energy mngt, SmartThings, Technologies, Z-waveAeotec Heavy Duty Switch 30 Amp
Aeon Labs Heavy Duty Switch
The Aeon Labs Heavy Duty Switch can control, automate and record the electricity consumption of a premise’s heavy-duty appliances. Works in and outdoors with appliances up to 30 amps. Ideal to switch your Geyser on and off on a time schedule created in the Home Automation Center.
SKU: n/a - Alarms, Apple HomeKit, Climate, Motion Sensors, Security, SmartThings, Technologies
Fibaro Motion Sensor Apple HomeKit Enabled
Alarms, Apple HomeKit, Climate, Motion Sensors, Security, SmartThings, TechnologiesFibaro Motion Sensor Apple HomeKit Enabled
Extremely versatile 4-in-1 Z-Wave sensor combining motion, temperature, light level and vibration functions.
- PIR (motion), light level and temperature sensors and detects vibrations
- Compatible with any Z-Wave or Z-Wave Plus Controller
- Supports protected mode (Z-Wave network security mode) with AES-
- 128 encryption
- Tamper and low-battery alarm notification
- Very small size makes it ideal for any Z-Wave system
- Z-Wave Plus Certified
SKU: n/a
Plugs
Aeotec Z-wave key fob
The Z-Wave.Me Key Fob is a Z-Wave device that can both control other Z-Wave devices and activate predefined scenes in an IP gateway. Although it is controlling other devices the Z-Wave.Me Key Fob can’t act as Z-Wave network controller (primary or secondary) and will always need a Z-Wave network controller to be included into a Z-Wave network. The Z-Wave.Me Key Fob can be used in five different modes that are picked by configuration commands:
Aeotec Heavy Duty Switch 30 Amp
Aeotec Heavy Duty Switch 30 Amp
Aeon Labs Heavy Duty Switch
The Aeon Labs Heavy Duty Switch can control, automate and record the electricity consumption of a premise’s heavy-duty appliances. Works in and outdoors with appliances up to 30 amps. Ideal to switch your Geyser on and off on a time schedule created in the Home Automation Center.
Fibaro Motion Sensor Apple HomeKit Enabled
Fibaro Motion Sensor Apple HomeKit Enabled
Extremely versatile 4-in-1 Z-Wave sensor combining motion, temperature, light level and vibration functions.
FIBARO TEMPERATURE SENSOR
Fibaro Temperature sensor
The Fibaro Temperature sensor is a digital thermometer with programmable resolution of 9 to 12 bits. It is suitable for measurement of the temperature in homes or offices. The accuracy is ±0.5 °C over a range of -10 ° C to 85 °C. The sensor is very small and can therefore be installed in another device(Eg Fibaro Door and Window Sensor). In addition, each sensor is addressed with a 64-bit code. For this reason several sensors can be connected to a single 1-Wire line. The power supply of 3 V to 5.5 V is directly powered via the data line.
FIBARO DIMMER BYPASS
Fibaro Dimmer Bypass is a device complementary to Fibaro Dimmer2.
Its installing a Fibaro Dimmer Bypass makes it possible to dim light sources with minimum power consumption, such as e.g. single 0,5Watt LED. Please note it is possible to dim only light sources clearly marked as dimmable.
AEOTEC MINIMOTE
The Aeon Labs Minimote is low-cost remote controller focused on end-user ease of use.
Although simplicity and user experience is the primary focus, the full range of Z-Wave remote controller capabilities are left intact for the advanced user. Network installation is vastly improved via the interface. The Minimote is upgradeable by the end-user such that the latest Z-Wave protocols are always available. An internal lithium battery allows for months of usage and is recharged via USB.
Aeotec Micro Switch
The Aeon Labs Micro Switch is a low-cost Z-Wave appliance switch specifically used to enable Z-Wave command and control (on/off) for existing in-wall switches. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.
LIFX Colour 1000 Wi -Fi Smart LED Light Bulb,Works with Alexa Multi-Colour, Dimmable, No Hub Required, Edison Screw E27 [Energy Class A ]
LIFX Colour 1000 Wi -Fi Smart LED Light Bulb,Works with Alexa Multi-Colour, Dimmable, No Hub Required, Edison Screw E27 [Energy Class A ]
Laptops & Computers
- LIGHTING, SmartThings, Switches & Dimmers, Technologies, Z-wave
FIBARO DIMMER BYPASS
Fibaro Dimmer Bypass is a device complementary to Fibaro Dimmer2.
Its installing a Fibaro Dimmer Bypass makes it possible to dim light sources with minimum power consumption, such as e.g. single 0,5Watt LED. Please note it is possible to dim only light sources clearly marked as dimmable.
SKU: n/a - Controllers
Vera Plus Controller, Z-Wave
Vera Plus Controller controllers, Z-Wave
The world’s most compatible home controller! Controls over 200 Z-Wave devices on your network, perfect for larger homes
Works with many popular devices using Wi-Fi, Z-Wave, ZigBee, or Bluetooth. Faster processor with more memory for maximum performance
SKU: MCV_VERA_Plus - Energy Modules, Qubino modules
Qubino DIN Rail Mounting Z-Wave Dimmer
Z-Wave Qubino Din Dimmer
- Mosfet Switching (Trailing Edge)
- Perfect for LED and CFL bulbs
- Controllable either through a Z-Wave network or from the wall switch
- Dimming loads from 1W to 200W
- Extremely low energy consumption
- Integrated power consumption management
- Supports connection of digital temperature sensor
- Easy installation (DIN rail mounting)
- Z-Wave Plus Certified
SKU: GOAZMNHWD1 - Energy Modules, Qubino modules
Qubino Flush Shutter Module with Z-Wave PlusZMNHCD1
Controller for blinds and awnings.
Enables Z-Wave control of blinds, awnings and curtains
Monitors power consumption
Optional Temperature Sensor
Very small size enables modules to fit into standard switch boxes (45mm recommended)
DIY installation
Z-Wave Plus Certified
SKU: GOAZMNHSD1
Lighting
Aeotec Z-wave key fob
The Z-Wave.Me Key Fob is a Z-Wave device that can both control other Z-Wave devices and activate predefined scenes in an IP gateway. Although it is controlling other devices the Z-Wave.Me Key Fob can’t act as Z-Wave network controller (primary or secondary) and will always need a Z-Wave network controller to be included into a Z-Wave network. The Z-Wave.Me Key Fob can be used in five different modes that are picked by configuration commands:
Aeotec Heavy Duty Switch 30 Amp
Aeotec Heavy Duty Switch 30 Amp
Aeon Labs Heavy Duty Switch
The Aeon Labs Heavy Duty Switch can control, automate and record the electricity consumption of a premise’s heavy-duty appliances. Works in and outdoors with appliances up to 30 amps. Ideal to switch your Geyser on and off on a time schedule created in the Home Automation Center.
Fibaro Motion Sensor Apple HomeKit Enabled
Fibaro Motion Sensor Apple HomeKit Enabled
Extremely versatile 4-in-1 Z-Wave sensor combining motion, temperature, light level and vibration functions.
FIBARO TEMPERATURE SENSOR
Fibaro Temperature sensor
The Fibaro Temperature sensor is a digital thermometer with programmable resolution of 9 to 12 bits. It is suitable for measurement of the temperature in homes or offices. The accuracy is ±0.5 °C over a range of -10 ° C to 85 °C. The sensor is very small and can therefore be installed in another device(Eg Fibaro Door and Window Sensor). In addition, each sensor is addressed with a 64-bit code. For this reason several sensors can be connected to a single 1-Wire line. The power supply of 3 V to 5.5 V is directly powered via the data line.
FIBARO DIMMER BYPASS
Fibaro Dimmer Bypass is a device complementary to Fibaro Dimmer2.
Its installing a Fibaro Dimmer Bypass makes it possible to dim light sources with minimum power consumption, such as e.g. single 0,5Watt LED. Please note it is possible to dim only light sources clearly marked as dimmable.
AEOTEC MINIMOTE
The Aeon Labs Minimote is low-cost remote controller focused on end-user ease of use.
Although simplicity and user experience is the primary focus, the full range of Z-Wave remote controller capabilities are left intact for the advanced user. Network installation is vastly improved via the interface. The Minimote is upgradeable by the end-user such that the latest Z-Wave protocols are always available. An internal lithium battery allows for months of usage and is recharged via USB.
Aeotec Micro Switch
The Aeon Labs Micro Switch is a low-cost Z-Wave appliance switch specifically used to enable Z-Wave command and control (on/off) for existing in-wall switches. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.
LIFX Colour 1000 Wi -Fi Smart LED Light Bulb,Works with Alexa Multi-Colour, Dimmable, No Hub Required, Edison Screw E27 [Energy Class A ]
LIFX Colour 1000 Wi -Fi Smart LED Light Bulb,Works with Alexa Multi-Colour, Dimmable, No Hub Required, Edison Screw E27 [Energy Class A ]
Recently Viewed
Aeotec Z-wave key fob
The Z-Wave.Me Key Fob is a Z-Wave device that can both control other Z-Wave devices and activate predefined scenes in an IP gateway. Although it is controlling other devices the Z-Wave.Me Key Fob can’t act as Z-Wave network controller (primary or secondary) and will always need a Z-Wave network controller to be included into a Z-Wave network. The Z-Wave.Me Key Fob can be used in five different modes that are picked by configuration commands:
Aeotec Heavy Duty Switch 30 Amp
Aeotec Heavy Duty Switch 30 Amp
Aeon Labs Heavy Duty Switch
The Aeon Labs Heavy Duty Switch can control, automate and record the electricity consumption of a premise’s heavy-duty appliances. Works in and outdoors with appliances up to 30 amps. Ideal to switch your Geyser on and off on a time schedule created in the Home Automation Center.
Fibaro Motion Sensor Apple HomeKit Enabled
Fibaro Motion Sensor Apple HomeKit Enabled
Extremely versatile 4-in-1 Z-Wave sensor combining motion, temperature, light level and vibration functions.
FIBARO TEMPERATURE SENSOR
Fibaro Temperature sensor
The Fibaro Temperature sensor is a digital thermometer with programmable resolution of 9 to 12 bits. It is suitable for measurement of the temperature in homes or offices. The accuracy is ±0.5 °C over a range of -10 ° C to 85 °C. The sensor is very small and can therefore be installed in another device(Eg Fibaro Door and Window Sensor). In addition, each sensor is addressed with a 64-bit code. For this reason several sensors can be connected to a single 1-Wire line. The power supply of 3 V to 5.5 V is directly powered via the data line.
FIBARO DIMMER BYPASS
Fibaro Dimmer Bypass is a device complementary to Fibaro Dimmer2.
Its installing a Fibaro Dimmer Bypass makes it possible to dim light sources with minimum power consumption, such as e.g. single 0,5Watt LED. Please note it is possible to dim only light sources clearly marked as dimmable.
AEOTEC MINIMOTE
The Aeon Labs Minimote is low-cost remote controller focused on end-user ease of use.
Although simplicity and user experience is the primary focus, the full range of Z-Wave remote controller capabilities are left intact for the advanced user. Network installation is vastly improved via the interface. The Minimote is upgradeable by the end-user such that the latest Z-Wave protocols are always available. An internal lithium battery allows for months of usage and is recharged via USB.
Aeotec Micro Switch
The Aeon Labs Micro Switch is a low-cost Z-Wave appliance switch specifically used to enable Z-Wave command and control (on/off) for existing in-wall switches. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.
LIFX Colour 1000 Wi -Fi Smart LED Light Bulb,Works with Alexa Multi-Colour, Dimmable, No Hub Required, Edison Screw E27 [Energy Class A ]
LIFX Colour 1000 Wi -Fi Smart LED Light Bulb,Works with Alexa Multi-Colour, Dimmable, No Hub Required, Edison Screw E27 [Energy Class A ]
DoorBird Video Door Station D101.
DoorBird Video Door Station D101, Polycarbonate Housing, White Edition, POE WiFi (D101 PolyWhite Latest Edition)Bird Home Automation Group D101 Video Door Station for Smartphones and Tablets
Specifications:
– Part Number D101 Video Door Station
– Item Weight: 290g
– Product Dimensions: 7.5cm x 3.5cm x 15.7cm
– Item model number: D101 Video Door Station
– Material: Polycarbonate
– Item Package Quantity: 1
– Number Of Pieces: 1
– Batteries Included: No
– Batteries Required: No
– Weight: 290 Grams
Philips Hue B22 White and Colour Ambiance Wireless Lighting Starter Kit.
Philips Hue B22 White and Colour Ambiance Wireless Lighting Starter Kit.
Philips Hue White and Colour Ambience Wireless Lighting B22 Bayonet Cap LED Starter Kit, 3 x 9.5 W B22 Hue Colour Bulbs, 1 x Hue Bridge 2.0, 1 x Dimmer Switch, Apple HomeKit Enabled, Works with Alexa [Energy Class A ]
Philips Hue White Ambiance Personal Wireless Lighting LED E27 Starter Kit.
Philips Hue White Ambiance Personal Wireless Lighting LED E27 Starter Kit.
Philips Hue White Ambiance Personal Wireless Lighting LED E27 Starter Kit, 2 9.5 W E27 Hue White Ambiance Bulbs, Wireless Dimmer Switch, Hue Bridge 2.0, Apple Home Kit Enabled, Works with Alexa [Energy Class A ]
Vera Plus Controller, Z-Wave
Vera Plus Controller controllers, Z-Wave
The world’s most compatible home controller! Controls over 200 Z-Wave devices on your network, perfect for larger homes
Works with many popular devices using Wi-Fi, Z-Wave, ZigBee, or Bluetooth. Faster processor with more memory for maximum performance
Vera Secure Advanced Smart Home Security Hub
Home control hub -optimized for security- that’s simple to use and reliable; used by millions globally and requires no monthly fees or contracts
Compatible with Wi-Fi, ZigBee, Z-Wave, Bluetooth BLE, and VeraLink; provides peace of mind that your home & loved ones are safe and secure
The “brain” of your wireless smart home/security system works with hundreds of brands including Amazon Alexa, 2GIG, Nest, Schlage, Yale, Kwikset, First Alert & more
Use the Vera mobile app or Amazon Alexa to control your smart home: i.e. turn off lights, lower thermostat, and create automatic Scenes like “Alexa bedtime”
Built-in piercing Siren Alarm alerts neighbors and scares off intruders. Built-in battery keeps your home protected when the power goes out. The optional cellular backup insures that you are able to stay connected when the internet connection is lost